Anztec PS 200 Manuel d'installation et d'utilisation
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Anztec PS 200. Anztec PS 200 6 pages.
Imprimer la pageAnztec PS200 Installation/Operating Guide V1.2
Anztec PS 200 Installation/Operation Guide
The PS200 is a power supply/interface suitable for connecting card terminals such as the Nayax
VPOS and Onyx to wash bays and peripheral devices on car wash/pet wash sites. The PS200 accepts
pulses from the coin mech and card terminal, and combines these down a single isolated output line
that can be configured for compatibility with any controller type.
When installing into manual bay controllers vacs etc. follow the recommendations below to ensure a
safe and reliable installation. The PS200 may be easily mounted on a spare length of DIN rail should
one be available. Alternatively, it can be affixed with adhesive onto a flat surface inside the control
enclosure. Start the installation by removing 2 covers from the PS200 flanges to expose the coin
mech and terminal block connectors as shown below.
1