Abtus ABT 8000 Manuel d'instruction - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Abtus ABT 8000. Abtus ABT 8000 16 pages. Data logging laser height & stagger gauge
Imprimer la page
6.0
Trouble Shooter
6.1
Readings are not showing or incorrect
Ensure the batteries are fully charged.
Restart the gauge and reconnect the DLHS to the app. Ensure the 'Connected' message
appears when pressing the 'Connect' button.
The 'Measure' button has to be pressed twice to get a reading; first press to turn on the
laser and second press to measure the distance. The user must wait at least 1 second
between the presses to allow the laser enough time to receive a reading and display it on
the screen.
Pressing the 'Measure' button three times rapidly will cause the DLHS to show an error
message on the readings. Please allow enough time for the device to measure and send
the reading to the display before starting a new recording.
6.2
GPS readings are not showing or inaccurate
After a cold start, the GPS unit requires roughly 1 minute to locate the satellites and
provide an initial GPS reading. This delay should only happen on the first recording,
subsequent readings shouldn't have any delays in providing accurate GPS coordinates.
Certain areas on the track and conditions can affect the readings provided by the GPS,
including signal obstructions caused by tunnels, buildings, trees or even lack of satellites.
16