Abtus ABT 8000 사용 설명서 - 페이지 16

{카테고리_이름} Abtus ABT 8000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abtus ABT 8000 16 페이지. Data logging laser height & stagger gauge

6.0

Trouble Shooter

6.1

Readings are not showing or incorrect

Ensure the batteries are fully charged.



Restart the gauge and reconnect the DLHS to the app. Ensure the 'Connected' message



appears when pressing the 'Connect' button.

The 'Measure' button has to be pressed twice to get a reading; first press to turn on the



laser and second press to measure the distance. The user must wait at least 1 second

between the presses to allow the laser enough time to receive a reading and display it on

the screen.

Pressing the 'Measure' button three times rapidly will cause the DLHS to show an error



message on the readings. Please allow enough time for the device to measure and send

the reading to the display before starting a new recording.

6.2

GPS readings are not showing or inaccurate

After a cold start, the GPS unit requires roughly 1 minute to locate the satellites and



provide an initial GPS reading. This delay should only happen on the first recording,

subsequent readings shouldn't have any delays in providing accurate GPS coordinates.

Certain areas on the track and conditions can affect the readings provided by the GPS,



including signal obstructions caused by tunnels, buildings, trees or even lack of satellites.