Duerkopp Adler 911 Manuel d'instructions de montage - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Duerkopp Adler 911. Duerkopp Adler 911 20 pages. Laser lamp
Également pour Duerkopp Adler 911 : Manuel d'instructions de montage (16 pages), Manuel d'instructions de montage (8 pages), Manuel d'instructions de montage (16 pages)

Fitting Instruction for Remaining Thread Monitor

2.2 Connecting the cables and hoses

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

–

Conduct the light barrier cable, the cable 9870 911017 (up to

the cable harness after modification status 9870 911003_2.0)

and the air hose through the bore on the base plate and attach

them with cable binders to the existing harness (consisting of

cables, pneumatic and lubrification hoses).

–

Conduct the cables to the right out of the machine arm to the

console on the right.

–

Conduct the air hose to the left out of the machine arm to the

console on the left.

–

If there is no plug connector X632 on the right console (up to

the cable harness after modification status 9870 911003_02.0):

Connect the cable 9870 911017 with the flat plugs onto the

clamp X552 on the base plate as follows (also compare

connection diagram 9890 911003 B):

white to 3

yellow to 4

green to 5

brown to 6

–

Connect the cable 9870 911018 with the adapter plug 1

(X100b) to the control unit.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 13 from 20