Duerkopp Adler 911 피팅 지침 매뉴얼 - 페이지 13

{카테고리_이름} Duerkopp Adler 911에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 911 20 페이지. Laser lamp
Duerkopp Adler 911에 대해서도 마찬가지입니다: 피팅 지침 매뉴얼 (16 페이지), 피팅 지침 매뉴얼 (8 페이지), 피팅 지침 매뉴얼 (16 페이지)

페이지 인쇄

Fitting Instruction for Remaining Thread Monitor

2.2 Connecting the cables and hoses

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

–

Conduct the light barrier cable, the cable 9870 911017 (up to

the cable harness after modification status 9870 911003_2.0)

and the air hose through the bore on the base plate and attach

them with cable binders to the existing harness (consisting of

cables, pneumatic and lubrification hoses).

–

Conduct the cables to the right out of the machine arm to the

console on the right.

–

Conduct the air hose to the left out of the machine arm to the

console on the left.

–

If there is no plug connector X632 on the right console (up to

the cable harness after modification status 9870 911003_02.0):

Connect the cable 9870 911017 with the flat plugs onto the

clamp X552 on the base plate as follows (also compare

connection diagram 9890 911003 B):

white to 3

yellow to 4

green to 5

brown to 6

–

Connect the cable 9870 911018 with the adapter plug 1

(X100b) to the control unit.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 13 from 20