Duerkopp Adler 911 피팅 지침 매뉴얼 - 페이지 15

{카테고리_이름} Duerkopp Adler 911에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duerkopp Adler 911 20 페이지. Laser lamp
Duerkopp Adler 911에 대해서도 마찬가지입니다: 피팅 지침 매뉴얼 (16 페이지), 피팅 지침 매뉴얼 (8 페이지), 피팅 지침 매뉴얼 (16 페이지)

페이지 인쇄
Duerkopp Adler 911 피팅 지침 매뉴얼
Fitting Instruction for Remaining Thread Monitor
2.3 Pre-assembling, connecting and attaching the control
Ausgabe/Edition:
Änderungsindex
03.2011
Rev. index: 00.0
Anbauanleitung Restfadenwächter
Teilesatz 0911 597754
Kit 0911 597754
–
Insert the spacers 1 (4x) into the bores of the residual thread
monitor carrier and attach the PCB 2.
1
–
Connect the cables onto the residual thread monitor PCB:
–
Plug connector X623 (from the cable harness or cable 9870
911017) to position 3; plug connector X621 of the light
barrier cable to position 4.
–
Attach the cables with the cable clips 5 to the residual
thread monitor carrier.
–
Screw the residual thread monitor carrier with PCB onto
the right console by using two M3 screws 6.
2
3
4
5
6
Printed in Germany
Teile-Nr./ Part-No.:
0791 911703
2
Blatt:
von
Sheet: 15 from 20