- ページ 15

モニター Duerkopp Adler 911のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Duerkopp Adler 911 20 ページ。 Laser lamp
Duerkopp Adler 911 にも：取付説明書 (16 ページ), 取付説明書 (8 ページ), 取付説明書 (16 ページ)

ページを印刷する

Fitting Instruction for Remaining Thread Monitor

2.3 Pre-assembling, connecting and attaching the control

Ausgabe/Edition:

Änderungsindex

03.2011

Rev. index: 00.0

Anbauanleitung Restfadenwächter

Teilesatz 0911 597754

Kit 0911 597754

–

Insert the spacers 1 (4x) into the bores of the residual thread

monitor carrier and attach the PCB 2.

–

Connect the cables onto the residual thread monitor PCB:

–

Plug connector X623 (from the cable harness or cable 9870

911017) to position 3; plug connector X621 of the light

barrier cable to position 4.

–

Attach the cables with the cable clips 5 to the residual

thread monitor carrier.

–

Screw the residual thread monitor carrier with PCB onto

the right console by using two M3 screws 6.

Printed in Germany

Teile-Nr./ Part-No.:

0791 911703

Blatt:

von

Sheet: 15 from 20