Dancover 3m storage pro Manuel d'instructions pour l'assemblage - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'assemblage pour {nom_de_la_catégorie} Dancover 3m storage pro. Dancover 3m storage pro 13 pages. Storage tent 8x12x5,2m pvc
Également pour Dancover 3m storage pro : Manuel (11 pages), Manuel (9 pages)

Imprimer la page
6 m PRO
Instructions
1
8
When assembling the tent, make sure
6
6
that all the wing nuts are attached to
the inside.
4
5
Connect one arch pipe (8) with the
7
7
extensions (6).
Attach the side bows (7) to the ends
of the extensions (6). Now connect the
roof braces (4, 5) with each other using
the 45-mm screws (17) and the wing
nuts (20). Connect the roof braces with
the respective extensions (6) using the
65-mm screws (18) and wing nuts (20).
2
Repeat step 1 for the next 4/8 elements
and place them on the ground one after
another, as illustrated.
6
8
6
4
7
5
3
Now connect the 5/9 arch elements
7
1,5 m
with each other using the side pipes
(9 und 10). Note that only side pipes
10 are used for the front segment. Use
the 100-mm screws (19) and wing nuts
(20) to tighten them.
10