Dancover 3m storage pro Инструкция по сборке - Страница 10

Просмотреть онлайн или скачать pdf Инструкция по сборке для Палатка Dancover 3m storage pro. Dancover 3m storage pro 13 страниц. Storage tent 8x12x5,2m pvc
Также для Dancover 3m storage pro: Руководство (11 страниц), Руководство (9 страниц)

Печатать страницу
6 m PRO
Instructions
1
8
When assembling the tent, make sure
6
6
that all the wing nuts are attached to
the inside.
4
5
Connect one arch pipe (8) with the
7
7
extensions (6).
Attach the side bows (7) to the ends
of the extensions (6). Now connect the
roof braces (4, 5) with each other using
the 45-mm screws (17) and the wing
nuts (20). Connect the roof braces with
the respective extensions (6) using the
65-mm screws (18) and wing nuts (20).
2
Repeat step 1 for the next 4/8 elements
and place them on the ground one after
another, as illustrated.
6
8
6
4
7
5
3
Now connect the 5/9 arch elements
7
1,5 m
with each other using the side pipes
(9 und 10). Note that only side pipes
10 are used for the front segment. Use
the 100-mm screws (19) and wing nuts
(20) to tighten them.
10