Cascade 6820937 Manuel d'installation et d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Cascade 6820937. Cascade 6820937 6 pages. Rotator shut-off – switch activated
Imprimer la pageInstallation (continued)
NOTE: UL Classified Kits require installation by qualified
personnel only without major disturbance, cutting, splicing or
soldering of factory installed wiring.
5
Install cab indicator light on the truck dashboard, overhead
guard, or any other easy to see location using customer
supplied hardware OR the Velcro strip provided. Clean the
mounting surfaces prior to installing the Velcro.
6
Install the Pushbutton Switch Assembly to the ROTATE
control lever. Refer to Installation Instructions 6822725,
included with the switch, for complete installation
procedure.
CAUTION: Consult the Lift Truck OEM for proper + power
source connection.
7
Connect cable ends to the components as shown.
12V Systems – Connect the fused positive wire to a 12V
switched power source. Connect the ground wire.
24V–48V Systems – Mount the voltage converter to truck.
Connect the fused positive wire from the converter to a
24V-48V switched power source. Connect the ground wire.
Check the cable routing for pinch points and clearance.
Use wire ties as needed.
WARNING: To reduce risk of fire, replace only
with the same type and ratings of fuse. The
fused power cable is polarity sensitive. The
positive wire must be connected to a positive
power source.
8
Connect battery cable(s) to their proper terminal(s).
Cab
Indicator
Light
Solenoid
Valve
Switch
24-48V
Fuse Block
Truck
Battery
7
Connect Cable
Ends
Fuse, 2A
Switched
Truck
8
IC Trucks – Use chassis ground.
Electric Trucks – Use battery ground.
Voltage
Converter
3
5
Install indicator light
AC1975.eps
6
Control
Handle
and Knob
AC2242.eps
12V
Fuse, 5A
Switched
Truck
Fuse Block
8
Truck
Battery
AC3153.eps