Danfoss iC7 Series Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss iC7 Series. Danfoss iC7 Series 16 pages. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Également pour Danfoss iC7 Series : Manuel d'installation (8 pages), Manuel d'installation (8 pages), Manuel d'installation (6 pages), Manuel d'installation (14 pages), Manuel d'installation (16 pages), Manuel d'installation (8 pages), Manuel d'installation (8 pages), Manuel d'installation (10 pages), Manuel d'installation (16 pages), Manuel d'installation (16 pages), Manuel d'installation (6 pages), Manuel d'installation (6 pages), Manuel d'installation (18 pages)

In-back/Out-back Cooling Kit for FA09-FA10

Installation Guide

74 (2.9)

8x Ø 6 (0.2)

2x Ø 8 (0.3)

Mounting Holes

29 (1.1)

4x Ø 7 (0.3)

Illustration 4: FA10 Mounting Plate Template for In-back/Out-back Cooling

2.4 Preparing the Backplate

To create vent openings in the cabinet backplate to match the openings in the mounting plate, use the following steps. Refer to

Illustration 5

for FA09 frequency converters and

Procedure

Cut out the vent openings in the cabinet backplate using the dimensions in the FA09 or FA10 template.

The openings must match the mounting plate openings.

Drill screw holes (6 mm) around the vent openings.

The FA09 requires 6 holes around each vent opening, and the FA10 requires 8 holes around each. The holes must align

with the holes in the outer flanges of the ducts.

321 (12.6)

280 (11.0)

271 (10.7)

16 (0.6)

295 (11.6)

328 (12.9)

Illustration 6

for FA10 frequency converters.

2x Ø 8 (0.3)

Mounting Holes

110 (4.3)

130 (5.1)

10 (0.4)

1051 (41.4)

896 (32.3)

140 (5.5) 180 (7.1)

AN371942471353en-000101 / 136R0248

Installation