Danfoss VLT 2800 Series Manuel de démarrage rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Danfoss VLT 2800 Series. Danfoss VLT 2800 Series 4 pages.
Également pour Danfoss VLT 2800 Series : Installation rapide (2 pages), Installation (2 pages), Installation rapide (2 pages)
Imprimer la page
■ How to Disassemble
To disassemble the VLT, use a screw driver 1 x 6mm
(size 4).
1. Remove the front cover by using the screw driver,
see figure 3
2. Lift the flat cable using the screw driver. Be care-
ful not to touch the components on the control
card. See figure 4 for instructions
3. Remove the screws on the left side of the control
card
4. Gently remove the control card
5. Keep the control card in the ESD shielding bag in
which it was delivered
Fig. 3: Moving the front cover with a screw driver
MI.28.A1.02 - VLT is a registered Danfoss trade mark
®
VLT
2800 Series
Fig. 4: To remove flat cable, place screw driver
behind cable and pull gently
5