Danfoss VLT 2800 Series 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Danfoss VLT 2800 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT 2800 Series 4 페이지.
Danfoss VLT 2800 Series에 대해서도 마찬가지입니다: 빠른 설정 (2 페이지), 설치 (2 페이지), 빠른 설정 (2 페이지)

페이지 인쇄
Danfoss VLT 2800 Series 빠른 시작 매뉴얼
■ How to Disassemble
To disassemble the VLT, use a screw driver 1 x 6mm
(size 4).
1. Remove the front cover by using the screw driver,
see figure 3
2. Lift the flat cable using the screw driver. Be care-
ful not to touch the components on the control
card. See figure 4 for instructions
3. Remove the screws on the left side of the control
card
4. Gently remove the control card
5. Keep the control card in the ESD shielding bag in
which it was delivered
Fig. 3: Moving the front cover with a screw driver
MI.28.A1.02 - VLT is a registered Danfoss trade mark
®
VLT
2800 Series
Fig. 4: To remove flat cable, place screw driver
behind cable and pull gently
5