Dunavox DXFH-48.130 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dunavox DXFH-48.130. Dunavox DXFH-48.130 14 pages.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

 Use two or more people to move and install Wine Cooler. Failure to do so

can result in back or other injury.

 To ensure proper ventilation for your Wine Cooler, the front of the unit

must be completely unobstructed. Choose a well-ventilated area with

temperatures above 60°F (16

be installed in an area protected from the elements, such as wind, rain,

water spray or drips.

 The Wine Cooler should not be located next to ovens, grills or other

sources of high heat.

 The Wine Cooler must be installed with all electrical, water and drain

connections in accordance with state and local codes. A standard

electrical supply (220-240V AC only, 50 Hz), properly grounded in

accordance with the National Electrical Code and local codes and

ordinances is required.

 Do not kink or pinch the power supply cord of Wine Cooler.

 The fuse (or circuit breaker) size should be 15 amperes.

 It is important for the Wine Cooler to be leveled in order to work properly.

You may need to make several adjustments to level it.

 All installation must be in accordance with local plumbing code

requirements.

 Make certain that the pipes are not pinched or kinked or damaged during

installation.

 Check for leaks after connection.

 Never allow children to operate, play with or crawl inside the Wine Cooler.

 Although the unit has been tested at the factory, due to long-term transit

and storage, the first batch of cubes must be discarded.

 Do not use solvent-based cleaning agents or abrasives on the interior.

These cleaners may damage or discolor the interior.

 Do not use this apparatus for other than its intended purpose.

INSTRUCTION MANUAL

C) and below 90°F (32°C). This unit must

131