Dunavox DXFH-48.130 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia kuchenne Dunavox DXFH-48.130. Dunavox DXFH-48.130 14 stron.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install Wine Cooler. Failure to do so
can result in back or other injury.
To ensure proper ventilation for your Wine Cooler, the front of the unit
must be completely unobstructed. Choose a well-ventilated area with
temperatures above 60°F (16
be installed in an area protected from the elements, such as wind, rain,
water spray or drips.
The Wine Cooler should not be located next to ovens, grills or other
sources of high heat.
The Wine Cooler must be installed with all electrical, water and drain
connections in accordance with state and local codes. A standard
electrical supply (220-240V AC only, 50 Hz), properly grounded in
accordance with the National Electrical Code and local codes and
ordinances is required.
Do not kink or pinch the power supply cord of Wine Cooler.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the Wine Cooler to be leveled in order to work properly.
You may need to make several adjustments to level it.
All installation must be in accordance with local plumbing code
requirements.
Make certain that the pipes are not pinched or kinked or damaged during
installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the Wine Cooler.
Although the unit has been tested at the factory, due to long-term transit
and storage, the first batch of cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior.
These cleaners may damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
INSTRUCTION MANUAL
°
C) and below 90°F (32°C). This unit must
131