Danfoss HC8000 Series Instructions pour l'utilisateur
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Danfoss HC8000 Series. Danfoss HC8000 Series 10 pages. Electronic programable room thermostats
Imprimer la page
User Instructions
Electronic Programable Room Thermostats
HC8000 Series Heat/Cool & HP8000 Heat Pump Thermostats
Product Features
•
7-day, 5/2-day or 24 hour programing, set by installer
•
2, 4 or 6 programed events each day, set by installer (can
also be set up as regular non-programable thermostat)
•
AM/PM or 24 hour clock display set by user
•
Fahrenheit or Centigrade temperature display, set by user
•
Easy to use Daylight saving time change, set by user
•
Electronic memory for retention of settings
•
Factory preset programs which can be edited by user
•
Available in battery and 24 Volt versions
•
Available in heat / cool versions, 1 heat / 1 cool & 2 heat /
2 cool models
•
Available in heat-pump versions, 2 heat / 1 cool & 3 heat /
2 cool models, each with emergency heat
Note 1:
Where "plus" is shown between two buttons, both buttons must be
pressed together
Note 2:
Where "or" is shown between two buttons, either buttons can be
pressed to either increase or decrease setting
Note 3:
Where "then" is shown between rows of buttons, follow
instructions for top row first before moving on to instructions for
second row
Note 4:
When using
,
, + or - buttons during programing, a single
press of the button changes the value by one unit, if the button is
held down the value will continue to change until the button is
released.
(if flashing, Optimum Start Control is in operation)
Cooling Output Indicator (if flashing,
cooling delay operating)
LCD
DISPLAY
Event Number Indicator
when programing
Low Battery
(flashing)
Fan Output & Speed Indicator
(if flashing, fan about to come on)
Cooling Set Point
A
UTO
Thermostat
H
Mode Select
EAT
C
OOL
O
FF
A
UTO
O
N
S
ART
Fan Mode
Select
Clock Display/Measured
Temperature Display
1
2
3 4 5 6 7
O TU WE TH FR SA SU
HP8000 Heatpump
Thermostat (cover
flap removed)
HC8000 Heat/Cool
Thermostat (cover
flap removed)
HC8000 Heat/Cool
Thermostat 3 Speed
fan (cover flap
removed)
Heating Set Point
(if flashing, Optimum Start Control is
in operation)
Heating Output Indicator (if flashing,
heating delay operating)
Increase Temperature
Room/Outdoor Temperature (if flashing
remote sensor is faulty
Decrease
Temperature
Vacation Mode
Day of Week
1