Danfoss HC8000 Series Instructions pour l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Danfoss HC8000 Series. Danfoss HC8000 Series 10 pages. Electronic programable room thermostats
Imprimer la page
H.4. Should Heat only or Cool only be required, use MODE button to select required service
H.5. Should OFF be required, use MODE button to select "Off"
!
Caution – Freeze protection is not provided in OFF mode
Selecting the Fan Operating Mode while in Hold mode
H.6. While in Hold mode fan operation can be selected to run in Auto mode, (turns on and off
with heat/cool demand), or On (runs continuously). Press FAN button to select required
mode.
H.7. Advice: HOLD mode can be cancelled at any time by pressing both
together and holding down for 2 seconds
I)
VACATION MODE OPTIONS
I.1. When in HOLD mode it is possible to program the duration of the HOLD mode by selecting
VACATION
I.2. Use Mode button to select required mode.
I.3. To select duration of vacation press DAY button then use + or – buttons to select the
number of days for which the HOLD mode is to be sustained. At the end of the period the
thermostat will return to normal programed operation
I.4. OPTIONAL: VACATION mode can be cancelled at any time by pressing both ∧ and ∨
buttons together and holding down for 2 seconds
J)
-
NON
PROGRAMMABLE OPERATION
!
Reminder - the thermostat will be permanently in this mode if selected by the
building owner or installer.
J.1.Selecting the required heating temperature
Press MODE button to select HEAT mode then use the
required temperature.
J.2.Selecting the required cooling temperature
Press MODE button to select COOL mode then use the
required temperature.
J.3.Press MODE button twice again to return to AUTO mode. The thermostat will now operate
heating and cooling to maintain the selected temperatures.
!
Reminder - AUTO can only be selected if the building owner or installer has set the
thermostat to allow auto-changeover mode.
J.4.Should Heat only or Cool only be required, use MODE button to select the required service.
J.5.Should OFF be required use MODE button to select "Off".
!
Caution - frost protection is not provided in OFF mode.
J.6.Selecting the fan operating mode
Fan operation can be selected to run in AUTO mode (turns of and off with heat/cool
demand) or On (runs continuously). Press FAN button.
∧
∨
and
buttons
∧
∨
or
buttons to select the
∧
∨
or
buttons to select the
LCD DISPLAYS
off
FF
Hold mode with Off selected
80˚
50˚
Fan Mode Select Options
UTO
80
50
: 00
UTO
77˚
68˚
F
50˚
F
80˚
F
80˚
50˚
F
F
80˚
50˚
F
BUTTONS
Mode
Fan
DAY
Mode
then
then
+
-
or
∧
∨
plus
∧
or
Mode
then
∨
∧
or
Mode
then
∨
Mode
x 2
Mode
Fan
5