Danfoss TP5000 RF Si Manuel d'installation et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Danfoss TP5000 RF Si. Danfoss TP5000 RF Si 14 pages. 5/2 day programmable electronic room thermostat
Également pour Danfoss TP5000 RF Si : Manuel d'instructions d'installation (14 pages), Instructions pour l'utilisateur (2 pages)

Imprimer la page

Installation

First, remove the wallplate from the back of the unit.

From the top left hand corner of the wallplate, there must

be clearances of at least 140mm to the right, 15mm to

the left, 30mm above and 100mm below in order to

mount the plug-in module.

Fix at a height of approximately 1.5m from the ﬂ oor,

away from draughts or heat sources such as radiators.

open ﬁ res or direct sunlight.

Prior to mounting the unit should be set in either ON/

OFF or chrono-proportional control mode (see below).

1) ON/OFF - boiler switches ON when below set temperature

and OFF when above..

1) ON/OFF

2) CHRONO