Danfoss VLT 5000 Series Manuel d'instructions - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Danfoss VLT 5000 Series. Danfoss VLT 5000 Series 16 pages. Frequency converter wobble function
Également pour Danfoss VLT 5000 Series : Manuel (12 pages), Manuel d'introduction (9 pages), Instruction (4 pages)
Imprimer la page
Install gasket material on the back openings of
the drive (Photo 2) prior to installation on the en-
closure back panel.
D3 and D4 frames: Use the template provided
with the kit (175R5639) to determine the drive
location on the back panel of the enclosure. The
template is referenced to the top-left corner of the
back panel. Therefore the template may be used
with any size back panel and both the 1800 mm
and 2000 mm high enclosures.
E2 frame: Use the measurements on Drawing
175F1037, Sheet 2 to determine the drive loca-
tion.
Prior to installing the back panel in the enclosure,
apply the gasket on both sides of the bottom duct
adapter as shown in Photos 3 and 4.
Photo 3. Bottom duct adapter
Instruction No: 175R5640 V3
Aug 13, 2008
Page 3
Photo 2. Drive open-
ings on rear are not
used in this applica-
tion.
Photo 4. Bottom duct adapter w/