Danfoss VLT 5000 Series 사용 설명서 - 페이지 3

{카테고리_이름} Danfoss VLT 5000 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT 5000 Series 16 페이지. Frequency converter wobble function
Danfoss VLT 5000 Series에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 소개 매뉴얼 (9 페이지), 지침 (4 페이지)

페이지 인쇄
Danfoss VLT 5000 Series 사용 설명서
Install gasket material on the back openings of
the drive (Photo 2) prior to installation on the en-
closure back panel.
D3 and D4 frames: Use the template provided
with the kit (175R5639) to determine the drive
location on the back panel of the enclosure. The
template is referenced to the top-left corner of the
back panel. Therefore the template may be used
with any size back panel and both the 1800 mm
and 2000 mm high enclosures.
E2 frame: Use the measurements on Drawing
175F1037, Sheet 2 to determine the drive loca-
tion.
Prior to installing the back panel in the enclosure,
apply the gasket on both sides of the bottom duct
adapter as shown in Photos 3 and 4.
Photo 3. Bottom duct adapter
Instruction No: 175R5640 V3
Aug 13, 2008
Page 3
Photo 2. Drive open-
ings on rear are not
used in this applica-
tion.
Photo 4. Bottom duct adapter w/