Dunster House ATLAS P5-3030PRG Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dunster House ATLAS P5-3030PRG. Dunster House ATLAS P5-3030PRG 15 pages. Pergola
Imprimer la page**Avoid splitting timber parts by pre-drilling all screw holes**
16x
35mm Screws
8x
45x140x630.A
4x
70x70x55 Bracket
Step 3.
•
Make sure your posts are level vertically (use a spirit level).
•
Use a tape measure to check the distance of the top and bottom diagonals (4 diagonals in total).
•
Make sure they are all the same before continuing withinstallation.
•
If they are different, slightly move posts to make all diagonals equal (A=B on the top and on the bottom of
posts).
•
Measure diagonals to check for squareness. Check Posts and Beams to make sure they are plumb
and level !!
•
Fix 70x70x55 Brackets to Posts using (4x) 35mm screws.
•
Secure the Pergola Posts to the ground using 70x70x55 Brackets. (Fixings not supplied)
•
Fix (2x) 45x140x630.A Brace to each Post using (2x) M10x120
A
B
Assembly Steps for Atlas Pergola 3.2m x 3.2m
16x
M10 Washer
16x
M10x120mm Hex Head Screws
45x140x630.A
M10 x 120mm Hex head screw
SCREW 35 mm
L Bracket - 70x70x55
2x- 45x140x3200.A
Page 5