Dunster House Vantage 300 Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dunster House Vantage 300. Dunster House Vantage 300 16 pages. Hexagonal summerhouse 3.0m x 2.6m

Imprimer la page

Repeat Step 10A.ii for all 6 roof panels to have structure as shown below.

10A.iii: Ridges

Cut the felt lengthwise in half (500mm wide) and nail it down either side of the ridge overlapping each side by approximately

250mm.

Felt Ridge

Step 10A.iv: Roof Decoration

Item: 1x Roof Metal Cover

1x Ball

6x 35mm Screws

All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture. Page-11

Vantage 300 Hexagonal Summer House

Ball

Roof Metal Cover

Felt- 2nd layer

Felt- 1st layer

You can trim the edges to match the roof.

Bolt (Provided with the ball)

35mm screw (Pre-drill)