Dunster House Vantage 300 Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для Садові будиночки Dunster House Vantage 300. Dunster House Vantage 300 16 сторінок. Hexagonal summerhouse 3.0m x 2.6m
Друкувати сторінкуRepeat Step 10A.ii for all 6 roof panels to have structure as shown below.
10A.iii: Ridges
Cut the felt lengthwise in half (500mm wide) and nail it down either side of the ridge overlapping each side by approximately
250mm.
Felt Ridge
Step 10A.iv: Roof Decoration
Item: 1x Roof Metal Cover
1x Ball
6x 35mm Screws
All dimensions are approximate and subject to the limitations of the material used and the methods of manufacture. Page-11
Vantage 300 Hexagonal Summer House
Ball
Roof Metal Cover
Felt- 2nd layer
Felt- 1st layer
You can trim the edges to match the roof.
Bolt (Provided with the ball)
35mm screw (Pre-drill)