AudioCodes GW & E-SBC Series Note de configuration - Page 11

Parcourez en ligne ou téléchargez le pdf Note de configuration pour {nom_de_la_catégorie} AudioCodes GW & E-SBC Series. AudioCodes GW & E-SBC Series 20 pages.

Imprimer la page

Configuration Note

2.2.2

MP-11x, Mediant 600, Mediant 1000, Mediant 2000, and Mediant

3000

For the MP-11x, Mediant 600, Mediant 1000, Mediant 2000, and Mediant 3000 devices,

follow the procedure below.



To restore factory defaults:

At the CLI prompt, type the following command to access the configuration mode, and

then press the Enter key:

# conf

At the prompt, type the following command to reset the device to default settings, and

then press the Enter key:

# RestoreFactorySettings

The CLI commands mentioned in the procedure are shown in the terminal emulation

program (HyperTerminal) below:

Figure 2-2: CLI for Resetting Device to Default (Non-MSBG Devices)

Version 6.4

2. Restoring Defaults using CLI

May 2012