AudioControl LC6i Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AudioControl LC6i. AudioControl LC6i 16 pages. Six channel line output converter
Imprimer la page
Quick Installation Information
For those of you short on time but high on ambition, we offer the fol-
lowing section to speed up your installation of the LC6i:
1. Physically mount the LC6i in a location that keeps it away from
soda spills, food crumbs, and curious fingers. You will want to select a
location that allows you access to the level controls. In many cases you
can find factory speaker leads in the rear of the vehicle that are easy to
access.
2. The LC6i needs to be installed in the signal path between your OEM
source unit or factory-installed amplifier(s) and an aftermarket external
amplifier and/or processor(s). Locate the speaker wires that are coming
from your factory source unit and/or amplifier and connect them to the
speaker-level inputs on your LC6i.
3. Connect the Output RCA connectors to cables that run to your after-
market external signal processors and/or amplifiers. If this is not obvious
to you, quickly pack up your LC6i and run to your nearest authorized
AudioControl dealer to have them perform the installation. You will
thank us later.
4. Connect +12 power, ground, and remote turn-on (if applicable).
5. Level match your LC6i to your source and amplifiers.
Note: You will want to turn the gains DOWN on your aftermarket am-
plifiers to maximize your systems performance and minimize any HISS.
Figure 1: Basic LC6i System
If you need to know more, then read on. Heck, if you don't need to
know more, still read on, because you can never know too much and as
much as we would like to get your calls and e-mails, most of the answers
to your questions are in this manual!
page 4