AudioControl LC6i Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Konverter Media AudioControl LC6i. AudioControl LC6i 16 halaman. Six channel line output converter

Quick Installation Information

For those of you short on time but high on ambition, we offer the fol-

lowing section to speed up your installation of the LC6i:

1. Physically mount the LC6i in a location that keeps it away from

soda spills, food crumbs, and curious ﬁngers. You will want to select a

location that allows you access to the level controls. In many cases you

can ﬁnd factory speaker leads in the rear of the vehicle that are easy to

access.

2. The LC6i needs to be installed in the signal path between your OEM

source unit or factory-installed ampliﬁer(s) and an aftermarket external

ampliﬁer and/or processor(s). Locate the speaker wires that are coming

from your factory source unit and/or ampliﬁer and connect them to the

speaker-level inputs on your LC6i.

3. Connect the Output RCA connectors to cables that run to your after-

market external signal processors and/or ampliﬁers. If this is not obvious

to you, quickly pack up your LC6i and run to your nearest authorized

AudioControl dealer to have them perform the installation. You will

thank us later.

4. Connect +12 power, ground, and remote turn-on (if applicable).

5. Level match your LC6i to your source and ampliﬁers.

Note: You will want to turn the gains DOWN on your aftermarket am-

pliﬁers to maximize your systems performance and minimize any HISS.

Figure 1: Basic LC6i System

If you need to know more, then read on. Heck, if you don't need to

know more, still read on, because you can never know too much and as

much as we would like to get your calls and e-mails, most of the answers

to your questions are in this manual!

page 4