Conrad 1082615 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Conrad 1082615. Conrad 1082615 9 pages. 2 ports hdmi & usb kvm switch

Imprimer la page

2 Ports HDMI & USB KVM Switch

Item no. 1082615

Intended use

The product is intended for operating up to two computers with just one USB mouse, one USB keyboard and

one HDMI-capable monitor. An additional USB 2.0 port allows for the connection of another USB device such

as an external hard drive. It is possible to connect a microphone and headphones to the front of the device.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the

product for purposes other than those described above, the product may be damaged. In addition, improper

use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and

keep them. Make this product available to third parties only together with its operating instructions.

This product complies with the statutory national and European requirements. All company names

trademark of HDMI Licensing L.L.C.

Delivery content

• HDMI & USB KVM switch

• 2 x HDMI USB cables

• Power adapter

• Operating instructions

Safety instructions

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling in this

manual, we assume no liability for any resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

a) Persons / Product

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become dangerous

playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,

moisture, flammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it from

any accidental use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage

the product.

• Also observe the safety and operating instructions of any other devices which are connected

to the product.

• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in

bathrooms, must be avoided under all circumstances.

• The mains outlet must be located near to the device and be easily accessible.

• As power supply, only use the supplied mains adapter.

• Only connect the power adapter to a normal mains socket connected to the public supply.

Before plugging in the power adapter, check whether the voltage stated on the power adapter

complies with the voltage of your electricity supplier.

• Never connect or disconnect power adapters if your hands are wet.

• Never unplug the power adapter from the mains socket by pulling on the cable; always use

the grips on the plug.

• When setting up the product, make sure that the cable is not pinched, kinked or damaged by

sharp edges.

• Always lay the cables so that nobody can trip over or become entangled in them. This poses

a risk of injury.

• For safety reasons, disconnect the power adapter from the mains socket during storms.

• If the power adapter is visibly damaged, do not touch it. Risk of fatal injury due to electric shock!

First turn off the power supply to the power outlet that the power adapter is connected to (flip

off the fuse and then turn off the residual current operated circuit breaker to disconnect the

power outlet at all phases). Now unplug the device from the power outlet. Dispose of the power

adapter in an environmentally friendly fashion, discontinue use of it immediately. Replace it with

an identical power adapter.

• Never use the product immediately after it has been brought from a cold room into a warm one.

The condensation generated could destroy the product. The plug-in power supply unit also

involves danger to life by electric shock! Allow the device to reach room temperature before

connecting and using it. This may take several hours.

Version 04/14

• Never pour liquids over electric devices and never place liquid-filled objects near the device. If

liquid or an object enters the interior of the device nevertheless, first power down the respective

socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains socket. Do

not operate the product anymore afterwards, but take it to a specialist workshop.

b) Miscellaneous

• Consult an expert when in doubt about operation, safety or connection of the device.

• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a

qualified shop. If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

Operating elements

5 V/DC, 2 A

1 Mouse USB port

2 Keyboard USB port

3 Console USB port

4 Microphone socket

5 Headphone jack

6 Audio LED

7 Audio ON/OFF switch

Operation

1. Turn off all devices to be connected.

2. Connect one monitor to the HDMI output (11) using the HDMI cable of the monitor.

3. Connect a USB keyboard and a USB mouse to the mouse USB port (1) and keyboard USB port (2)

respectively.

4. Connect the USB port of the first computer to the USB-A plug and the PC1 USB-B port (13) to the

USB-B plug of the HDMI USB cable provided.

5. Connect the HDMI port of the computer to the PC1 HDMI input (12) using the HDMI plug of the

HDMI USB cable provided.

6. Follow the same instructions as mentioned under steps 4 and 5 in order to connect a second computer

to the PC2 HDMI and USB ports.

7. If needed, connect another device such as an external hard drive to the Console USB port (3). Use

the microphone socket (4) and headphones jack (5) to connect respective audio accessories. Press

the Audio ON/OFF button (7). The green audio LED (6) lights up indicating that the audio channel is

enabled. Press the Audio ON/OFF button again to mute audio output.

8. Connect the round plug of the power adapter to the 5 V/DC, 2 A socket (10) and the mains plug of the

power adapter provided to a normal wall outlet.

9. Turn on the computer connected to PC1 port and wait until it has started up. Once the computer has

properly completed installation and start-up operations, press the Select button (9) to select PC1. With

each time pressing the Select button, the blue LED (8) alternates between PC1 and PC2. Check if all

connected devices function properly.

10. Then turn on the computer connected to PC2 port. Once it has properly completed installation and start-

up operations, press the Select button to select PC2. Check if all devices connected function properly.

The installation is then complete and the device ready for operation.

Note that at least one of the devices connected must be a computer with USB port. Otherwise

the switching mechanism will not function.

front

Audio

ON/OFF

Console

Audio

ON/OFF

Console

back

PC1

Sink

PC1

Sink

HDMI

USB

HDMI

USB

HDMI

8 PC1 and PC2 LEDs

9 Select button (PC1 or PC2)

10 5 V/DC, 2 A socket

11 HDMI output

12 HDMI input

13 USB-B port

Select

PC2 PC1

Source

Select

PC2 PC1

Source

PC2

USB