Danley DTS20 Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Danley DTS20. Danley DTS20 8 pages.

Imprimer la page

Section

Your New Subwoofer

1.1

Unpacking

For most of the Danley Sound Labs line we recommend that it be unpacked by two or more people. Refer to the spec sheet for

product weight. Remove tape and open top flaps. Lay the box on its side and slide the subwoofer out. Remove the packaging

wrap.

1.2

Inspection

Check to make sure the product is not missing hardware of any kind. If any brackets or additional accessory hardware is missing,

please don't hesitate to contact Danley Sound Labs.

1.3

Shipping Damage

If your subwoofer appears to have been damaged in shipping, please take clear photographs and contact Danley Sound Labs

immediately.

Section 2

2.1

THE CS SUBWOOFER

The CS30 is a compact subwoofer with a specially designed port that tunes the cabinet to have a higher sensitivity at low

frequencies.

2.1

THE DTS SUBWOOFER

The DTS family is a collection of subs designed for the home theater and high- end hi-fi market. They all use Tapped Horn

technology, but are distinct from our TH line in that they are not designed to deliver enough bass to fill a stadium, just your living

room!

Section 3

3.1

What Size Amplifier to Use

Selecting the right amplifier for your subwoofer depends on a variety of factors and uses. The owner is ultimately responsible for

choosing the best amplifier or amplifiers for the application. We recommend choosing an amp that is rated no less than continuous

and no higher than program. Please note "Continuous" does not mean "forever"! Most subwoofer manufactures, including Danley

Sound Labs, subscribe to the AES standards for subwoofer power ratings.

3.2

Connecting to the Subwoofer

Your Danley loudspeaker has two NL4 ("speak-on") connectors located on a panel on the rear of the box. All specialty subwoofers

are wired as passive. The two NL4 connectors are wired parallel.

Pinout: Passive

Positive

amp 1

1 -

Negative amp 1

Pass Through

2 -

Pass Through

Page | 4

DANLEY OWNER'S MANUAL

Understanding the Difference

Initial Set Up

Wiring View of a NL4 Connector