Audiophile APS PurePower 1050 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Audiophile APS PurePower 1050. Audiophile APS PurePower 1050 19 pages. 120 volt models audio power supply

Imprimer la page

1. About the Purepower Aps

Installing optional Power Packs

Modules must be installed before powering the APS.

CAUTION:

A small amount of arcing may occur when connecting a PowerPack Module to the

APS. This is normal and will not harm you. Insert the connection cable into the APS battery con-

nector quickly and firmly.

· Plug the first PowerPack cable into the battery connector on the APS rear panel

· If additional PowerPacks are to be installed, plug the cable of the second cabinet into the

battery connector on the previous Powerpack

NOTE: The batteries charge to 80% capacity in approximately 2 hours. However, it is recommend-

ed that the batteries charge for 24 hours after installation or long-term storage. The battery

charging process will occur during normal operation and will not interfere with the supply of

power from the APS.

Audiophile Power Supply • www.audiophileaps.com

Installation

| 09