CONTACLIP 16099.2 Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} CONTACLIP 16099.2. CONTACLIP 16099.2 4 pages. Gsm controllable i/o module

Imprimer la page

CONTA-ELECTRONICS

=====GSM controllable I

=====

GSM controllable I/ / / / O module

O module

GSM controllable I

O module

Electrical specifications

Order Information

type

Cat. no.

Weight

Input / Output Data

* of measured value

8 multifunctional analog / dig. inputs

resolution / accuracy (0..10V)

input resistance (0..10V)

input current digital inputs (typ.)

UI minimal pulse length

input threshold digital Inputs

4 relay outputs

rated / inrush current (Ohmic load)

max. power rating

life span @ Ohmic load

max. switching frequency

contact material / test voltage

GSM Data

Frequency

Sensitivity

Transmit power

Antenna

General Data

module power supply

module current (max)

Reference out

Power Backup

operating / storage temperature

Max. relative humidity

CE marking

conductor cross section / strip length

mounting / installation position

module size LxWxH (TS 35 / direct)

insulating material / flammability class

protection degree (DIN 40050)

installation guidelines

Accessories

GSM antenna

Cat.no.

GSM external antenna

Cat.no.

USB programming cable

Cat.no.

GSM-PRO.dab.xls 25-11-2011

GSM-PRO quick start guide rev1 _EN.doc

=====

GSM-PRO

16099.2

275gr

0..10V / 24VDC (4..30VDC)

20mV / ±(20mV+0,3%*)

46kOhm

@10V: 0,3mA / @24V: 0,8mA / @30V: 1,0mA

800ms (while not transmitting)

Low < 2V / High > 4V

4 x CO Contact, 250 V ~

5A / 5 A

1200VA at 240V AC, 5A

Electrical: at max. load: > 1,5 x 10

cycles.

Mechanical: 15 x 10

-1

6 min

at rated current, 1200 min

at no load

AgNi / 4kV

850/900/1800/1900 MHz

–108 dBm @ 850/900MHz / -107dBm @ 1800/1900MHz (typical)

Class 4 (2W@850/900 MHz), Class 1 (1W@1800/1900 MHz)

50 Ohm impedance, SMA connector

10..30V DC

275 mA DC @ 24V DC

4,7V ±10% / 20mA

Internal maintenance free supercap

-20°C...+50°C / -20°C...+70°C

80%, non condensing

Low Voltage Directive (LVD) 2006/95/EC, according requirements of EN 50178

EMC Directive 2004/108/EC, according requirements of EN 55011 and EN 61326-1

R&TTE 1999/5/EC according requirements ETSI EN 301-511 V9.0.2

0,2 - 2,5 mm² screw clamp connection / 6mm

DIN-rail TS35 or direct mounting / any

88 x 95 x 60 / 58 mm (without antenna)

Housing: noryl. Terminals: polyamid 6.6 V0 / UL94-V0

IP 20

for mounting-, wiring- and installation instructions, see Manual

GSM-antenna

16101.2

GSM-antenna-external-SMA-2,5m

16061.2

GSM-USB-cable

16103.2

Further information:

Quick Start Guide

cycles

Features:

• 8 multi-functional analog/digital inputs: 0..10V, 24VDC

• 4 relay outputs CO contact 250V/5A

• LED status indication for all I/Os

• SMS / E-mail status report for all I/Os

• SMS control for all outputs

• SMS / E-mail notification on status change at inputs

• SMS notification on power loss

• SMS / E-mail notification on power up

• Easy to use PC configuration program

www.conta-clip.com

Cat. No.: 95121.5

The GSM-PRO is a compact remote telemetry and control

system.

The various I/Os are monitored and controlled by SMS / E-

mail communication through the GSM network.

Every defined input status change (digital) or reached level

(analog) sends a SMS / E-mail notification to a selected

group of users. The outputs are set by simply sending an

SMS to the GSM-PRO.

I/Os are defined by an easy to use PC configuration

program.

Further information:

GSM- - - - PRO

GSM

PRO=

PRO