Contacta STS-K080-IP Manuel d'installation et d'utilisation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Contacta STS-K080-IP. Contacta STS-K080-IP 20 pages. Window intercom system
Imprimer la page
Fault Diagnosis LEDs
Factory Default Settings
To return the amplifier the factory default settings:
1.
Unplug the power supply and then reconnect it.
2. Press the On/Off button and Volume In (-) button together, then release.
3. The Volume In LED bar will have all LEDs illuminated, while the Volume Out
LED bar will display the firmware revision number in a fixed pattern of LEDs.
This indicates that default settings have been restored.
•
Volume In LED 8 will stay red if there is a fault
with the staff microphone.
•
Volume Out LED 8 will stay red if there is a
fault with the customer microphone.
•
Volume In LED 8 will flash red if there is a
fault with the loop (i.e. a broken aerial).
16