DAPAudio PSS-110 MKII Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio PSS-110 MKII. DAPAudio PSS-110 MKII 16 pages.
Également pour DAPAudio PSS-110 MKII : Manuel (16 pages)

DAPAudio PSS-110 MKII Manuel
PSS-110 MKII
Volume control Channel 1
Turn this control to adjust the volume of the mic/line 1 channel input (17).
Volume control Channel 2
Turn this control to adjust the volume of the mic 2 channel input (18).
Volume control Channel 3
Turn this control to adjust the volume of the line 3 channel input (19).
High frequency control; ±10 dB at 10 kHz
Turn this control to adjust the high frequencies.
Master volume control:
Turn this control to adjust the main output level.
Line / Mic. Switch
Select the input source for channel 1 (Line / Mic).
Battery level indicator
Battery status.
Low frequency control; ±10 dB at 100 Hz
Turn this control to adjust the bass frequencies.
Recharge indicator
When charging, the LED is continuously on.
Power LED indicator
This LED indicates when the power is switched on.
Line / Mic IN connector 1
This combined jack can be used to connect a mono signal source, for example an XLR
microphone. You can also use the ¼" jack connector to connect line-level signal sources.
Mic IN connector 2
This combined jack can be used to connect a mono signal source, for example an XLR
microphone. You can also use the ¼" jack connector to connect line-level signal sources.
RCA unbalanced input Channel 3
Unbalanced stereo RCA jacks.
Line out
Connect to the line input of a mixer. If you use the PSS-110 MKII together with DAP Splash active
speakers, use a mono-to-mono jack cable.
Voice priority
Decreases the volume of all channels, except for microphone 1 and the (1 or 2) wireless mic(s).
Ordercode: D2609
7
Fig. 03