DAPAudio PSS-110 MKII 매뉴얼 - 페이지 8

{카테고리_이름} DAPAudio PSS-110 MKII에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio PSS-110 MKII 16 페이지.
DAPAudio PSS-110 MKII에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

PSS-110 MKII

Volume control Channel 1

Turn this control to adjust the volume of the mic/line 1 channel input (17).

Volume control Channel 2

Turn this control to adjust the volume of the mic 2 channel input (18).

Volume control Channel 3

Turn this control to adjust the volume of the line 3 channel input (19).

High frequency control; ±10 dB at 10 kHz

Turn this control to adjust the high frequencies.

Master volume control:

Turn this control to adjust the main output level.

Line / Mic. Switch

Select the input source for channel 1 (Line / Mic).

Battery level indicator

Battery status.

Low frequency control; ±10 dB at 100 Hz

Turn this control to adjust the bass frequencies.

Recharge indicator

When charging, the LED is continuously on.

Power LED indicator

This LED indicates when the power is switched on.

Line / Mic IN connector 1

This combined jack can be used to connect a mono signal source, for example an XLR

microphone. You can also use the ¼" jack connector to connect line-level signal sources.

Mic IN connector 2

This combined jack can be used to connect a mono signal source, for example an XLR

microphone. You can also use the ¼" jack connector to connect line-level signal sources.

RCA unbalanced input Channel 3

Unbalanced stereo RCA jacks.

Line out

Connect to the line input of a mixer. If you use the PSS-110 MKII together with DAP Splash active

speakers, use a mono-to-mono jack cable.

Voice priority

Decreases the volume of all channels, except for microphone 1 and the (1 or 2) wireless mic(s).

Ordercode: D2609

Fig. 03