DAPAudio D2141 Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio D2141. DAPAudio D2141 18 pages.

single channel and to establish an accurately proportioned mix of all input

signals. The channel faders should be positioned within the range of -6dB to

0dB, leaving you with sufficient room to allow precise matching of differences

in the channel's level settings. The overall volume is set with the master fader.

Even though the channel faders offer an additional gain of +6dB.

18 LED VU Meter

The dual LED's indicators are used to indicate the master output level of

channels Right and Left.

19. Stereo / Mono Switch

Set the master 1 output to STEREO or MONO function.

20. MASTER 1 Fader

A high-quality true logarithmic 58mm fader, which controls the Balanced

Master 1 output (39) level to control the master output level (volume). To avoid

distorted output try to maintain an average output signal level +6dB. Be sure

this volume control is always set to zero before turning the unit on.

Please, make sure to close the fader of the corresponding input channel

or at least the MASTER control before connecting any audio signal

sources. This will save yourself, your audience, and your equipment

from unnecessary stress resulting from plug-in noise.