DAPAudio IEM-100 Beltpack Manuel du produit - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} DAPAudio IEM-100 Beltpack. DAPAudio IEM-100 Beltpack 17 pages. Wireless in ear monitor set
Également pour DAPAudio IEM-100 Beltpack : Manuel de l'utilisateur (19 pages)

Imprimer la page

1. Receiver Control

Set Up and Operation

Before opating the unit make sure the batteries are inserted.

Receiver Battery Installation

Press the battery compartment door

And slide the cover in the direction

As shown in Figure 2.

Receiver control



Audio Left/ Right Control.

Rotate the Audio Control knob for adjusting the balance between Audio Left/ Right or Channel

1/2. In Mid position the Audio Left and Right are set to the same volume level.



On/Off/Volume Control.

Rotate the On/Off/Volume knob to adjust the volume.



Frequency/ Channel Setting.

Press the up or down button until the Frequency/ Channel starts flashing, you're now in the setting

state.

a.Press the SET button to switch between Frequency and Channel.

b.Use the up/down buttons to set the desired Frequency/ Channel.

Install the batteries.

Fig. 2

Fig. 3

Fig. 4