DAPAudio IEM-100 Beltpack 제품 설명서 - 페이지 7

{카테고리_이름} DAPAudio IEM-100 Beltpack에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DAPAudio IEM-100 Beltpack 17 페이지. Wireless in ear monitor set
DAPAudio IEM-100 Beltpack에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)

페이지 인쇄

1. Receiver Control

Set Up and Operation

Before opating the unit make sure the batteries are inserted.

Receiver Battery Installation

Press the battery compartment door

And slide the cover in the direction

As shown in Figure 2.

Receiver control



Audio Left/ Right Control.

Rotate the Audio Control knob for adjusting the balance between Audio Left/ Right or Channel

1/2. In Mid position the Audio Left and Right are set to the same volume level.



On/Off/Volume Control.

Rotate the On/Off/Volume knob to adjust the volume.



Frequency/ Channel Setting.

Press the up or down button until the Frequency/ Channel starts flashing, you're now in the setting

state.

a.Press the SET button to switch between Frequency and Channel.

b.Use the up/down buttons to set the desired Frequency/ Channel.

Install the batteries.

Fig. 2

Fig. 3

Fig. 4