DARCHE Panorama 2 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DARCHE Panorama 2. DARCHE Panorama 2 13 pages. Roof top tent

1. Flip the tent base over.

2. Locate the pre-drilled holes at the

edge of the base and attach the

ladder bracket to the base using

40mm Steel M6 bolt, washers,

and Nyloc nuts.

For your safety and protection see Diagram C below for correct placement and angle of

ladder. DO NOT CLIMB ON LADDER UNTIL CORRECT ANGLE IS ACHIEVED (approx. 75

degrees between ladder and ground). NOTE: If the angle of the ladder is at 90

degrees and/or does not reach the ground, you will need a ladder extension (not

included). The ladder placed in correct position also acts as a brace for the suspended base of

your tent.

DIAGRAM C

ATTACHING THE LADDER

DIAGRAM B