DARCHE Panorama 2 매뉴얼 - 페이지 9

{카테고리_이름} DARCHE Panorama 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DARCHE Panorama 2 13 페이지. Roof top tent

1. Flip the tent base over.

2. Locate the pre-drilled holes at the

edge of the base and attach the

ladder bracket to the base using

40mm Steel M6 bolt, washers,

and Nyloc nuts.

For your safety and protection see Diagram C below for correct placement and angle of

ladder. DO NOT CLIMB ON LADDER UNTIL CORRECT ANGLE IS ACHIEVED (approx. 75

degrees between ladder and ground). NOTE: If the angle of the ladder is at 90

degrees and/or does not reach the ground, you will need a ladder extension (not

included). The ladder placed in correct position also acts as a brace for the suspended base of

your tent.

DIAGRAM C

ATTACHING THE LADDER

DIAGRAM B