DURAVIT Inipi Manuel d'utilisation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DURAVIT Inipi. DURAVIT Inipi 19 pages.
Également pour DURAVIT Inipi : Pré-installation (10 pages)
Imprimer la page
> Remove light soiling with a soft, damp cloth.
> Remove extensive staining by rubbing with a damp scouring sponge and scouring
detergent.
9.11 Glass
> Clean the glass using a commercially-available glass cleaner.
> After every shower, dry the glass surface with a glass wiper (only Inipi Ama).
9.12 Acrylic
Cleaning
> Clean acrylic with a soft, damp cloth.
> Use the Duravit Maintenance Set for Acrylic Surfaces for the occasional thorough
cleaning and for removing stubborn spots.
> Remove extensive soiling with warm water and a liquid detergent, dish washer
liquid or soap suds.
Damage
> Remove scratches and other surface damage with the Duravit Acrylic Surface Main-
tenance and Repair Set.
9.13 Plumbing hardware
Note!
Damage to the surfaces through the use of the wrong cleaner!
Do not use cleaners that
contain hydrochloric acid, formic acid or acetic acid
contain phosphoric acid or chlorine bleach, or
abrasive effect.
Do not mix cleaners.
Do not use pad sponges or micro fibre cloths.
Do not use steam cleaners as the high temperatures could damage the product.
Spray cleaner onto the cloth and under no circumstances onto the tap fittings. The
spray can penetrate openings and gaps in the taps and cause damage.
Take note of the cleaning instructions and the time taken to work under the specific
32
conditions and do not allow the cleaner to remain on the surface longer than
necessary.
> Clean the taps regularly in order to prevent a build-up of limescale.
> Follow the cleaning manufacturer's instructions.
> Rinse with clean water to remove all traces of the cleaner.
10. Disposal
You have purchased a battery-powered remote control from us.
Batteries (rechargeable batteries) may not be mixed with household rubbish. You are
required as a consumer to take them to a designated collection centre.
You may return the remote control at no charge to where the product was purchased
or the collection/recycling centre in your community.
11. Troubleshooting Support
Problem
Potential cause
Charging station not illumi-
Light ring deactivated.
nated.
Sauna does not respond to in-
Remote control is not
puts from the remote control.
within the reception
range of the sauna.
Remote control is not
connected via Bluetooth.
Sauna does not start
Mains switch switched
or cannot be switched on
off.
Mains fuse is switched
off.
Ground-fault switch
(RCD) or circuit breaker
has tripped.
see
Solution
page
>
Activate light ring.
29
>
Move the remote control
closer to the sauna until
the "home" symbol is il-
luminated white.
>
Connect the remote
26
control via Bluetooth.
>
Turn the mains switch to
ON.
>
Switch on mains circuit
breaker.
>
Disconnect the sauna from
the mains.
>
Call customer service.
33