DURAVIT Inipi Manuel d'utilisation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DURAVIT Inipi. DURAVIT Inipi 19 pages.
Également pour DURAVIT Inipi : Pré-installation (10 pages)

Imprimer la page
DURAVIT Inipi Manuel d'utilisation
Problem
Potential cause
Ground-fault switch (RCD) has
Accumulation of moisture
tripped.
on the heating elements.
Forgotten PIN
Incorrect language set
Remote control is no longer
working.
Remote control display has
frozen.
Messages
"Door open, sauna switches
Door is open
off!"
"Door open, heater does not
Door is open
start! Close the door, restart
the heater."
"Door open! Close the door,
Door is open
otherwise the heater is
switched off."
"Overheating of the sauna
Overheating; opening for
heater. Heater switched off!
the air supply or air
Switch off the sauna, let it
outlet is sealed or cov-
cool down and then restart it."
ered.
"Sauna temperature too high,
heater switched off! Switch off
the sauna, let it cool down and
then restart it."
"Electronics temperature too
high, heater switched off!
Switch off the sauna, let it
cool down and then restart it."
34
see
Solution
page
>
Call customer service.
>
Unlock the sauna using
the Super-PIN; you can
obtain this from our Cus-
tomer Service
>
Press the "Off" and "OK"
27
buttons simultaneously
to access the Language
menu.
>
Reset the remote control:
>
Press the "right", "left"
and "On/Off" buttons
simultaneously until
the display turns black
or for a minimum of 2
seconds.
>
If the problem persists,
call Customer Service
>
Close the door.
>
Close the door.
>
Restart the heater.
>
Close the door.
>
Disconnect the sauna from
the mains and let it cool
down.
The sauna can be used
again once it has cooled
down.
Problem
Potential cause
"Battery in the controls is
empty! Inform Customer
Service, quote error code
200."
"Defective real-time clock!
Inform Customer Service,
quote error code 207."
"Defective SD card. Inform
Customer Service, quote error
code 214."
"Defective Bluetooth. Inform
Customer Service, quote error
code 216."
"Error on the vaporisation
module! Inform Customer
Service, quote error code
223."
"Vaporiser water tank is
Vaporiser water tank is
empty! Add distilled water."
empty.
Vaporiser water tank is
leaking.
"Infusion temperature is too
"Sauna temperature is
low! Wait a short time and try
too low.
the infusion again."
"Sauna session is finished."
Hourglass timer has
expired.
"No connection to the
Controls/sauna is
controls" (only the remote
switched off.
control)
Bluetooth address is
incorrect.
see
Solution
page
>
Make a note of the error
code and call Customer
Service.
Sauna can continue to be
used.
Date, time and timer
function are no longer
working
>
Make a note of the error
code and call Customer
Service.
Stored data is no longer
available e.g. scenario
sound, warning and
advisory tones
>
Make a note of the error
code and call Customer
Service.
Sauna can no longer be
operated with the remote
control
>
Make a note of the error
code and call Customer
Service.
An infusion is no longer
possible
>
Add distilled water.
25
>
Screw on the vaporiser
water tank firmly and
check the seal.
>
An infusion is possible if
the "Vaporiser" symbols is
illuminated white.
>
Switch on the sauna.
18
>
Enter the Bluetooth
26
address of the controls in
the remote control.
35