AFA Stainless AFUR3018USCOMBO Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} AFA Stainless AFUR3018USCOMBO. AFA Stainless AFUR3018USCOMBO 16 pages.

Imprimer la page

F-1

T-9

Drop-In Anchor (F-1) holes should

have been drilled by your counter top

fabricator. Carefully install Drop-In

Anchor (F-1) with Hammer (T-9).

T-10

1/8"

(3mm)

3/8"

(10mm)

Optional: Apply a bead of Silicone

Sealant (T-10) 1/8"-1/4" away from

edge of counter cutout and then

align sink on counter.

D-2

D-3

D-4

D-5

Set the Strainer Bowl (D-2) and Top

Seal (D-3) into the hole from above

and push down firmly. Wipe any

excess Plumber's Putty

(T-13)

from top of the sink hole. Place the

Bottom Seal (D-4) on the underside

of the Strainer Bowl (D-2) and

tighten with Strainer Nut (D-5)

using Channel Lock Wrench (T-11).

F-2

F-5

F-3

Align sink upside down on to

counter top and then attach mounting

clips (F-2). Position brackets so the

clip edge overlaps sink ledge and

thread screw (F-5) into predrilled

holes through washer and clip as

shown.

Clean edge of counter cutout and

the top rim of the sink with a Cloth

(T-15) and Alcohol (T-16) .

away

F-4

Tighten Wing Nut (F-4) to Bracket

Screw (F-5) evenly. Do not over

tighten.

T-16

T-15

F-5

F-4

F-2