- ページ 7
配管製品 AFA Stainless AFUR3018USCOMBOのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AFA Stainless AFUR3018USCOMBO 16 ページ。
ページを印刷する7
F-1
T-9
Drop-In Anchor (F-1) holes should
have been drilled by your counter top
fabricator. Carefully install Drop-In
Anchor (F-1) with Hammer (T-9).
10
T-10
1/8"
(3mm)
3/8"
(10mm)
Optional: Apply a bead of Silicone
Sealant (T-10) 1/8"-1/4" away from
edge of counter cutout and then
align sink on counter.
8
D-2
D-3
D-4
D-5
Set the Strainer Bowl (D-2) and Top
Seal (D-3) into the hole from above
and push down firmly. Wipe any
excess Plumber's Putty
(T-13)
from top of the sink hole. Place the
Bottom Seal (D-4) on the underside
of the Strainer Bowl (D-2) and
tighten with Strainer Nut (D-5)
using Channel Lock Wrench (T-11).
11
F-2
F-5
F-3
Align sink upside down on to
counter top and then attach mounting
clips (F-2). Position brackets so the
clip edge overlaps sink ledge and
thread screw (F-5) into predrilled
holes through washer and clip as
shown.
7
9
Clean edge of counter cutout and
the top rim of the sink with a Cloth
(T-15) and Alcohol (T-16) .
away
12
F-4
Tighten Wing Nut (F-4) to Bracket
Screw (F-5) evenly. Do not over
tighten.
T-16
T-15
F-5
F-4
F-2