DURHAND B72-037 Utiliser l'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Utiliser l'instruction pour {nom_de_la_catégorie} DURHAND B72-037. DURHAND B72-037 15 pages. Five-in-one workbench household & diy workstation

Imprimer la page

Car Creeper & Dolly Mode

Please follow these steps to install casters in the car creeper & dolly mode:

1.Find the casters, gaskets and screws in the back of the workbench, then line

them up. Notice that the two universal casters with brakes should be installed

under the compass and the left two fixed casters on the other side.

Two fixed casters

Two universal

casters with brakes

2.Put one gasket on the screw hole – secure using a screwdriver.

3.Rotate the caster to fix the four screws, make sure the casters are fully

secured.

4.Follow steps 1-3 to assemble the other three casters. Your car creeper is

ready to go.

5.Connect a pulling rope to the towing hole. The dolly is completed.

TIP: How to install the casters

The four casters are packed in the back of the workbench and need to be

installed by the consumer after purchase. During installation, please be aware

of the following:

1.Always use the gaskets which are provided. See the illustrations above.

-5-