DURHAND B72-037 Использование инструкции - Страница 5
Просмотреть онлайн или скачать pdf Использование инструкции для Настольный компьютер DURHAND B72-037. DURHAND B72-037 15 страниц. Five-in-one workbench household & diy workstation
Печатать страницуCar Creeper & Dolly Mode
Please follow these steps to install casters in the car creeper & dolly mode:
1.Find the casters, gaskets and screws in the back of the workbench, then line
them up. Notice that the two universal casters with brakes should be installed
under the compass and the left two fixed casters on the other side.
Two fixed casters
Two universal
casters with brakes
2.Put one gasket on the screw hole – secure using a screwdriver.
3.Rotate the caster to fix the four screws, make sure the casters are fully
secured.
4.Follow steps 1-3 to assemble the other three casters. Your car creeper is
ready to go.
5.Connect a pulling rope to the towing hole. The dolly is completed.
TIP: How to install the casters
The four casters are packed in the back of the workbench and need to be
installed by the consumer after purchase. During installation, please be aware
of the following:
1.Always use the gaskets which are provided. See the illustrations above.
-5-