4IPNET EAP200 Manuel d'installation rapide - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 4IPNET EAP200. 4IPNET EAP200 15 pages. Enterprise access point
Imprimer la page
If you use another EAP200 as the peer AP, simply repeat the above-mentioned steps to configure another
peer AP(s).
On each and every configuration page, you may
Click SAVE to save the changes, but you must reboot the system upon the completion of all
Note:
configuration settings for the changes to take effect. When clicking SAVE, the following message will
appear: "Some modifications have been saved and will take effect after Reboot."
Congratulation!
Now, 4ipnet EAP200 is installed and configured successfully.
After EAP200's network configuration is completed, please remember to change the IP Address of
your PC Connection Properties back to its original settings in order to ensure that your PC functions
properly in its real network environments.
It is strongly recommended to make a backup copy of the configuration settings.
For further configuration and backup information, please refer to the User's Manual.
Copyright © 4IPNET, INC. All rights reserved.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 12 Virtual AP Overview Page
10
Quick Installation Guide
EAP200 Enterprise Access Point
P/N: 10020101208
ENGLISH