4IPNET EAP200 빠른 설치 매뉴얼 - 페이지 14

{카테고리_이름} 4IPNET EAP200에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP200 15 페이지. Enterprise access point

If you use another EAP200 as the peer AP, simply repeat the above-mentioned steps to configure another

peer AP(s).

On each and every configuration page, you may

Click SAVE to save the changes, but you must reboot the system upon the completion of all

Note:

configuration settings for the changes to take effect. When clicking SAVE, the following message will

appear: "Some modifications have been saved and will take effect after Reboot."

Congratulation!

Now, 4ipnet EAP200 is installed and configured successfully.

After EAP200's network configuration is completed, please remember to change the IP Address of

your PC Connection Properties back to its original settings in order to ensure that your PC functions

properly in its real network environments.

It is strongly recommended to make a backup copy of the configuration settings.

For further configuration and backup information, please refer to the User's Manual.

4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Figure 12 Virtual AP Overview Page

Quick Installation Guide

EAP200 Enterprise Access Point

P/N: 10020101208

ENGLISH