4IPNET EAP210 Manuel de l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 4IPNET EAP210. 4IPNET EAP210 20 pages. Enterprise access point
Également pour 4IPNET EAP210 : Manuel d'installation rapide (15 pages)

Imprimer la page

2.3 Hardware Installation

Please follow the steps mentioned below to install the hardware of EAP210 / EAP220 / EAP320:

Step 1. Place the EAP210 / EAP220 / EAP320 at the best location. The best location is usually at the center

of your intended wireless network.

Step 2. Connect the EAP210 / EAP220 / EAP 320 to your network device. Connect one end of the Ethernet

cable to the Uplink port of EAP210 / EAP220 / EAP320 and the other end of the cable to a switch, a

router, or a hub. EAP210 / EAP220 / EAP320 is then connected to your existing wired LAN network.

Step 3. There are two ways to supply power to EAP210 / EAP220 / EAP320

a) Connect the DC power adaptor to the EAP210 / EAP220 / EAP320 power jack socket.

b) The EAP210 / EAP220 / EAP320 Uplink port is capable of receiving DC currents. Connect a

(IEEE 802.3at-compliant for EAP220 and 802.3af/at-compliant for EAP210 / EAP320) PSE

device (e.g. a PoE-switch) to the Uplink port of EAP210 / EAP220 / EAP320 with the Ethernet

cable.

Please follow the steps mentioned below to install the hardware of EAP747 / EAP750 / EAP757:

Step 1. Place the EAP747 / EAP750 / EAP757 at the best location. The best location is usually at the center

of your intended wireless network. If admin would like to mount the AP on the wall (on a socket), the

figure below indicates how the mounting kit can be used on the back of the device. Screw the metal

panel to the wall, and then turn the EAP747 / EAP750 / EAP757 clockwise to fasten to the panel. For

installation instructions on the Ceiling Mount Kit, please refer to the included Installation Guide.

Enterprise Access Point ENGLISH

User's Manual