- ページ 18

無線アクセスポイント 4IPNET EAP210のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。4IPNET EAP210 20 ページ。 Enterprise access point
4IPNET EAP210 にも：クイック・インストール・マニュアル (15 ページ)

ページを印刷する

2.3 Hardware Installation

Please follow the steps mentioned below to install the hardware of EAP210 / EAP220 / EAP320:

Step 1. Place the EAP210 / EAP220 / EAP320 at the best location. The best location is usually at the center

of your intended wireless network.

Step 2. Connect the EAP210 / EAP220 / EAP 320 to your network device. Connect one end of the Ethernet

cable to the Uplink port of EAP210 / EAP220 / EAP320 and the other end of the cable to a switch, a

router, or a hub. EAP210 / EAP220 / EAP320 is then connected to your existing wired LAN network.

Step 3. There are two ways to supply power to EAP210 / EAP220 / EAP320

a) Connect the DC power adaptor to the EAP210 / EAP220 / EAP320 power jack socket.

b) The EAP210 / EAP220 / EAP320 Uplink port is capable of receiving DC currents. Connect a

(IEEE 802.3at-compliant for EAP220 and 802.3af/at-compliant for EAP210 / EAP320) PSE

device (e.g. a PoE-switch) to the Uplink port of EAP210 / EAP220 / EAP320 with the Ethernet

cable.

Please follow the steps mentioned below to install the hardware of EAP747 / EAP750 / EAP757:

Step 1. Place the EAP747 / EAP750 / EAP757 at the best location. The best location is usually at the center

of your intended wireless network. If admin would like to mount the AP on the wall (on a socket), the

figure below indicates how the mounting kit can be used on the back of the device. Screw the metal

panel to the wall, and then turn the EAP747 / EAP750 / EAP757 clockwise to fasten to the panel. For

installation instructions on the Ceiling Mount Kit, please refer to the included Installation Guide.

Enterprise Access Point ENGLISH

User's Manual