4IPNET EAP220 Manuel d'installation rapide - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 4IPNET EAP220. 4IPNET EAP220 18 pages. Enterprise access point
Également pour 4IPNET EAP220 : Manuel de l'utilisateur (20 pages)
Imprimer la page
Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)
To extend the wireless coverage, EAP220 supports up to 8 WDS links per RF card for connecting wirelessly
to other WDS-capable APs, or peer APs. By default, all WDS profiles are disabled.
Click on the Wireless button on the main menu.
Select the Repeater tab.
Choose WDS as the Repeater Type.
Choose the desired WDS profile:
(a) Enable WDS.
(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.
If you are using another EAP220 as the peer AP, simply repeat the above-mentioned steps to configure
another peer AP(s).
On each and every configuration page, you may click SAVE to save the changes of your configured
settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the
Note:
following message will appear: "Some modifications have been saved and will take effect after
APPLY."
Copyright © 4IPNET, INC. All rights reserved.
EAP220 Enterprise Access Point
12
Quick Installation Guide
ENGLISH