4IPNET EAP220 Quick Installation Manual - Page 16

Browse online or download pdf Quick Installation Manual for Wireless Access Point 4IPNET EAP220. 4IPNET EAP220 18 pages. Enterprise access point
Also for 4IPNET EAP220: User Manual (20 pages)

Print Page

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAP220 supports up to 8 WDS links per RF card for connecting wirelessly

to other WDS-capable APs, or peer APs. By default, all WDS profiles are disabled.

 Click on the Wireless button on the main menu.

 Select the Repeater tab.

 Choose WDS as the Repeater Type.

 Choose the desired WDS profile:

(a) Enable WDS.

(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.

If you are using another EAP220 as the peer AP, simply repeat the above-mentioned steps to configure

another peer AP(s).

On each and every configuration page, you may click SAVE to save the changes of your configured

settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the



Note:

following message will appear: "Some modifications have been saved and will take effect after

APPLY."

EAP220 Enterprise Access Point

Quick Installation Guide

ENGLISH